31 - Process 2020

Midstream and Downstream

Based on our in-house expertise in engineering, design, fabrication, and packaging we can deliver a number of midstream and downstream equipment solutions that provide our customers with certified, flexible, and cost-effective equipment solutions. We can provide off-the-shelf solutions as well as exclusive designs for unique needs manufactured according to your specific requirements.

All our products are fully supported by our engineering, quality, and data book systems. Because of our varied expertise in the Process Equipment field, we are your one-stop-shop for all your equipment design, fabrication, and project management needs

Crude Oil Production Facilities 01

Crude Oil Production Facilities

Our Crude Oil Production Facilities are used for separation, heating, dehydration, stabilization, storage, metering and pumping of crude oil. All our equipment complies with DNV 2.7-1 and 2.7-3 and is CSC certified. We have standardised 10,000, 25,000 and 40,000 BOPD Early Production Facilities based on API crudes.

Gas Compression and Deh Facilities 01wm

Gas Compression and Dehydration Facilities

Built to the highest industry standards, Specialist Services Gas Compression and Dehydration Facilities range includes: Gas Compression Skids, Gas Dehydration Units, Gas Sweetening Units, and Amine Treatment Units. Skids comply with DNV 2.7-1 and 2.7- 3 and are CSC certified.

Produced Water Treatment Facility 01wm

Produced Water Treatment Facilities

Specialist Services provides engineered solutions to meet our clients’ requirements for water handling during fracturing, production, disposal and enhanced oil recovery, in compliance with high quality standards. Our Produced Water Treatment Facilities range includes: Hydrocyclones Skids, Gas Floatation Units and IGF Vessels, Degassers and Coalescer Filters.

Gas Conditioning Skids 01

Gas Conditioning Skids

Specialist Services Gas Conditioning Skids perform two functions; remove all liquid droplets and solid contaminants from the gas and adjust the gas temperature. All of the system components and piping are skid mounted for transport and installation.

Pig Launcher 01

Pig Launcher and Receiver

Specialist Services Pig Launchers and Receivers are built as per ASME section VIII / ASME B31.4 / B31.8 for pressure rating class of 150psi through to 2500psi, using carbon steel, stainless, API and alloy steel materials for pipe ranging from 3” to 56”.

Pressure Vessel 01wm

Pressure Vessels

We have the capability and extensive knowledge n carrying out engineering, procurement and manufacturing of Pressure Vessels (coded / non coded) in compliance with international codes and standards, in line with customers’ specifications and project requirements. We are certified for ASME U, U2 and S, National Board R and NB. We are capable of manufacturing pressure vessels in different materials, such as CS, SS, CS + Clad (in SS 316L, Alloy 625, Alloy 825 etc.), and with thickness ranging from 3mm to 100mm or more. We cater services to Upstream, Mid and Downstream industries, including oil field service companies, EPC’s, OEM’s etc. We have the required approvals in place with all end users in the MENA region.

Chemical Injection Skid 01

Chemical Injection Packages

Our Chemical Injection Skids facilitate process flow to improve process stream characteristics or improve oil recovery. Specialist Services can timely deliver high quality, sophisticated Chemical Injection Packages that comply with international standards. We can also provide Multi-Compartmental Tank Skids for handling various chemicals and Multipoint Injection Skids where space is a main constraint.

Metering Skids 01

Oil and Gas Metering Skid Packages

Specialist Services can provide a full range (ultrasonic, coriolis, turbine or orifice type of meters) of pre-fabricated Metering Skids with no site welding requirement as per client specifications. Our complete solutions include engineering, material selection, system side (Flow Computer, SCADA, HMI and others), procurement, fabrication and site support for skid packages.

Multi Select Manifold Skids 01

Multi-Select Manifold Skids

The Multiport Flow Selector (MPFS) allows the selecting and diverting of well fluids from a single well to a single test unit, flow loop or sampling device. Instead of 21 separate valves required with a seven-line manifold, the MPFS requires only one valve for each of the lines. The device is more compact, requires much less piping, is less expensive with only one-third of the required valves, and is considerably lighter—a critical factor on many offshore topsides installations.

Inlet Manifolds 01

Inlet Manifolds

Specialist Services has the capability and extensive knowledge in carrying out engineering, procurement and manufacturing of Inlet Manifolds (test / production) in compliance with international codes and standards, customers’ specifications and project requirements.

Pressure Reduction Skid

Pressure Reduction Skids

Engineered and manufactured to incorporate client specific requirements our Skid-Mounted Pressure Reduction Package integrates the functions of regulating, metering, monitoring, tele-metering, remote control, noise elimination, odorising, heating and safety protection. Our Pressure Reduction Skids benefits include a compact structure, safety gas supply, complete functions and low investment.

Our Midstream and Downstream equipment solutions include:

  • Crude Oil Production Facilities
  • Gas Compression and Dehydration Facilities
  • Produced Water Treatment Facilities
  • Gas Conditioning Skids
  • Pig Launchers and Receivers
  • Pressure Vessels
  • Chemical Injection Packages
  • Oil and Gas Metering Skid Packages
  • Multi-Select Manifold Skids
  • Inlet Manifolds
  • Pressure Reduction Skids

Modular Solutions

Specialist Services’ in-house engineering capabilities across mechanical, piping, and structural disciplines, combined with modular assembly, enable us to deliver modular solutions in line with your specific needs in mind. The pre-assembled nature of the units reduces site construction time and labour required, thereby reducing costs, saving time, and increasing operational efficiencies. The strategic location of our manufacturing facility offers direct and easy access to the sea and nearby ports, which is instrumental for global transportation.

Pre-Assembled Racks – PAR

Pipe rack modules are pre-loaded pipe racks that provide the necessary infrastructure to support pipes, power cables, and other equipment. These steel structures are widely used in industrial projects such as oil and gas refineries and petrochemical plants. These modular systems are critical to ensuring the safety of your industrial plant's daily operations. Our pipe racks are designed with a thorough understanding of the mechanical and environmental challenges they will encounter, considering load requirements, material compatibility, and environmental factors.

Pre-Assembled Units – PAU

A modular unit is composed of several interconnected Pre-Assembled Units (PAU) and large loose equipment. The fabrication of these modules is performed at our facility, equipped with suitable equipment, machines, and qualified personnel. Before shipping, we perform a trial assembly to ensure the mechanical fit, as well as some pre-commissioning activities. After de-assembly, the modules are packed, delivered, and re-assembled on site.

Complementary products

Drilling and Testing

Complete range of engineered pressure control solutions and well testing equipment designed and manufactured in line with the most stringent energy industry specifications.

UBD and MPD Packages, Mud Tank Systems, Drilling Manifolds, Separators, Surge Tanks, Water Bath Heaters, Steam Heat Exchangers, Tanks, Burner Heads and Burner Booms, Flares, Oil and Gas Diverter Manifolds, Choke Manifolds, Surface Safety Valves (SSV), Data Headers, Knock Out Drums, Trailer Mounted Packages, Piping Packages, High Pressure Piping, Sand Management Packages, Steam Boilers…

Find out more


Specialist Services provides a complete package of Early Production Facilities (EPF) that enables customers to bring wells on production faster.

Our EPF facilitate long-term data acquisition and analysis of produced fluid flow, pressure and temperature and assist you in the long-term planning for a permanent installation.

Find out more

Modular Solutions for Data Centres

Specialist Services offers innovative plug and play modular DfMA (Design for Manufacture & Assembly) solutions for technology / Data Cener sector.

We have a complete in-house team of multidisciplinary engineers and highly competent fabricators, which enable us to deliver customized and innovative solutions on time and in line with the highest quality standards.

Find out more